MINI-MAX

MINI-MAX

bolt elongation meter


JSDATA Smart Cubic:
Jaeshininformation Co., Ltd 17, Deogan-ro 104beon-gil, Gwangmyeong-si, Gyeonggi-do, Gwangmyeong Station M Cluster B106, Phone: 031-388-7874, E-mail : support@jsdata.co.kr

▶ The FIRST cost-effective ultrasonic solution available on the market.

▶ EFFECTIVELY monitor your bolts during periodic shutdowns over the service life of the fastener.

▶ VISUALLY compare the unloaded to the loaded waveform

▶ MEASUREMENT QUANTITIES Time (nanoseconds), Elongation, Load, Stress, and %Strain.

▶ DISPLAY OPTIONS — RF, Rectified, Large Digits with Limits Bar.

▶ DISPLAY RESOLUTION 1/8 inch VGA 240 x 160 pixels.

▶ STORES 8000 readings and waveforms in multiple groups.

▶ BUILT-IN linear regression or vector for optimizing load measurements.

▶ AUTO SET feature automatically opti- mizes detection and adjusts display.

▶ HI/LO ALARM tolerance limits work in conjunction with the data port and external pump shut-off device

Mini-Max Technical Specifications and Features

■ Measurement method (Mini standard): 1-96 inches (2.5-244 cm)

■ Resolution: ±0.00001 inch (0.0001 mm)

■ Storage capacity: 8,000 bolt lengths and elongation measurements
and volt quality state waveform

Measurement method: Ultrasonic measurement (1-10Mhz)
Measurement type: bolt length and temperature, stress, load, degree of elongation
Provide threshold alarm function
Air wrench and automatic locking possible by alarm value
Maximum number of storage bolts: 8,000 (non-volatile)
Data Excel data storage function
One-handed: 63.5(W)x165(H)x31.5mm(D)
Measurement by magnetic sensor and bonding agent according to bolt material

Since the bolt has elasticity, the length of the bolt increases as the clamping force increases.

Since the optimal torque (Torqur) is 80% just before the bolt is damaged,

No torque should be applied, and accurate control of the tightening force will allow the bolt to be used at greater strength.

There is. (NIST's Fastener Quality Act information)