MAX-II

MAX-II

Bolt Extensometer2 - Large Screen Support


JSDATA Smart Cubic:
Jaeshininformation Co., Ltd 17, Deogan-ro 104beon-gil, Gwangmyeong-si, Gyeonggi-do, Gwangmyeong Station M Cluster B106, Phone: 031-388-7874, E-mail : support@jsdata.co.kr

▶ Quantity - elongation, load, stress, strain and time (nanoseconds)
▶ Daylight readable color QVGA display (320x240 pixels).
▶ Measurement mode - pulse-echo, echo-echo, echo echo verification (triple echo).
▶ Auto Correlation - Transformer Placement.
▶ User-defined auto-calibration function.
▶ 4GB internal and up to 64GB external SD memory.
▶ USB 1.1 connection.
▶ Analog, serial and alarm outputs.
▶ PC interface reporting software.
▶ Import and export files - between Max II and MiniMax.
▶ Li-Ion pack & 6 AA emergency battery backup option.
▶ Issue a two-year warrant

Physical Weight: 4.5 lbs (2.04 kg) with battery. Dimensions: 8.5W x 6.5H x 2.5D in (216 x 165 x) 70mm).
Operating Temperature: 14 to 140F (-10C) to 60C). Keyboard: 21 tactile membrane switch keys.
Case: Aluminum body with nickel extrusion plated aluminum end caps (hermetically sealed).
Display: RF (full waveform view), +/- modified (half wave view), numeric or split screen combination (wavenumber + large digits) Environment: Meets IP65 requirements

USB: Direct USB 1.1 PC connection.

Power connector: 12v @ 2amps, adapter 100-240VAC,

.7A, 50-60Hz. 5-pin Lemo (included): RS232Output - RS232 PC serial interface.

Alarm Outputs - Two independent alarm outputs triggered by the gate.

Analog Output - Proportional output (amplitude or distance), 0-10 volts. Converter connectors: 2 LEMO 00 connectors.

Memory log format: Grid (alphanumeric).

Capacity: 4Gb internal and up to 64Gb external SD slot.

Screen Capture: Capture a tagged interface file (.tif) for quick documentation. User settings: 64 user configurations.

Power Li-ion pack: 10.8v, 2A hours, 18 hours of normal operation.

Battery Backup: Emergency battery backup. Six 1.5V alkaline, 1.2V AA Nicad cells, 1.2V AA NI-MH or other equivalent.

Battery Life (Continuous Use): Alkaline (12 hours), Nicad (5 hours) and NI-MH (12 hours), default setting.

Electronic Display: Blanview sunlight readable QVGA TFT color display (320 x 240 pixels).

Viewable area 4.54 x 3.40 inches (115.2 x 86.4 mm) or 5.7 inches (144.78 mm) diagonal.

16 color palettes, different color options and different brightnesses. Screen refresh rate: 60Hz.

Timing: Precision TCXO timing using a single-shot 100MHz 8-bit ultra-low power digitizer. Pulsar Types: Spikes, Square Waves and Tone Bursts.

Pulser voltage: 100 - 400v.

Pulse Width: Selectable step options Spike, Thin, Wide, HV Spike, HV Thin, HV Wide,

TB .5 MHz, TB 1 MHz, TB 2 MHz, TB 5 MHz, TB 10 MHz. spike 40ns, square wave 80~400ns,

Tone burst 50ns to 1 microsecond. Gain: 0 to 110 dB at 0.2 dB resolution. Manual and AGC control. Damping: 50, 75, 100, 300, 600, 1500 ohms. Frequency Band: Wideband 1.8 - 19 MHz (-3 dB) filter. horizontal li

Log Format: Grid (alphanumeric).Capacity: 4Gb internal and up to 64Gb external SD slot.
Screen Capture: Tagged Interface File (.tif) Capture for quick documentation.
User settings: 64 user configurations

Lithium Ion Pack: 10.8v, 2amp hrs, typical 18 hours operation.
Battery Backup: Emergency battery backup. 6 x 1.5V Alkaline, 1.2V AA Nicad cells, 1.2VAA NI-MH or other equivalent
source. Battery Life (Continuous Use): Alkaline (12 hours), Nicad (5 hours) and NI-MH (12 hours), default setting.

Display: Blanview sunlight readable QVGA 
TFT color display (320 x 240 pixels). Viewable 
area 4.54 x 3.40 in (115.2 x 86.4 mm), or 5.7 
in (144.78 mm) diagonal. 16 color pallete, multiple color options and variable brightness.
Screen Refresh Rate: 60Hz.
Timing: Precision TCXO timing with single 
shot 100 MHz 8 bit ultra low power digitizer.
Pulser Types: Spike, Square Wave & Tone 
Burst.
Pulser Voltage: 100 - 400v.
Pulse Width: Selectable step options Spike, 
Thin, Wide, HV Spike, HV Thin, HV Wide, TB 
.5MHz, TB 1MHz, TB 2MHz, TB 5MHz, TB 10 
MHz. Spike 40 ns, Square Wave 80 to 400 ns, 
Tone Burst 50 ns to 1 microsecond.
Gain: 0 to 110dB with 0.2dB resolution. 
Manual and AGC control.
Damping: 50, 75, 100, 300, 600, & 1500 ohms.
Frequency Band: Broadband 1.8 - 19 MHz 
(-3dB) filter.
Horizontal Linearity: +/- 0.4% FSW.
Vertical Linearity: +/- 1% FSH.
Amplifier Linearity: +/- 1 dB.
Amplitude Measurement: 0 to 100% FSH, 
with 1% resolution.
Delay: 0 - 999.999in (25,400mm) at steel 
velocity.
Measurement Gates: Three independent 
gates depending on measurement mode 
selected, with audible and visual alarms. 
Amplitude 5-95%, 1% steps

Settings: 64 custom user-defined settings; Factory settings can also be edited by the user.
Auto Setup: Detect, range, and personal display setup process bolts.
Gates: 3 measuring gates, depending on
Tunable starting and threshold values in the measurement mode used.
Alarm Limits: Adjustable Hi/LO Tolerance
With visual LEDs and audible beeps. Hardware alarm output (requires accessory cable).
Field correction: vector or regression correction curves for improved accuracy load and stress

Units: English (in), metric (mm), or hours (µs).
Speed: 0.0492 to .5510 in/µs (1250–13995) m/s).
Measurement mode: pulse echo (P-E),
Eco Eco (E-E) or Eco Eco Eco (E-EV).
Measuring range: 1 to 999.999 inches
In pulse echo (PE) measurement (2540 cm)
Way. The range is varied using multi-echo.
Mode - material type and consistency.
Detection: Zero Crossing.
Resolution: +/- 0.00001 inches (0.0001 mm).
Calibration: Automatic, fixed, single or two-point zero calibration options.
Quantity: hours - nanoseconds.
Elongation - change in length (inches/mil liter).
Load - The applied load in pounds KIP or megapascals MPa.
Stress - force for applied unit area stress
(inches per inch or millimeters per millimeter).
%Strain - Ratio length to effective elongation.
Bolt Material: Choose a type from a preset or a custom list.

Transducer Type: Single Element - 1 MHz to 10 MHz frequency and 1/8" to 1" diameter.
Magnetic and non-magnetic options are available.
Glue-On: Available for short bolts with minimum elongation/short elongation to eliminate transducer placement error.
Connectors: Microdot, Lemo 00 or BNC option selected depending on transducer model. Customized transducer: available for special applications.

actory calibration traceable to NIST & MILSTD-45662A.

2 year limited

Korea Atomic Energy Research Institute